|
Charles Lewis Napier (April 12, 1936 – October 5, 2011) was an American character actor known for playing supporting and occasional leading roles in television and films. He was frequently cast as police officers, soldiers, or authority figures, many of them villainous or corrupt. After leaving his Kentucky hometown to serve in the Army, he graduated from college and worked as a sports coach and art teacher before settling on acting as a career. Napier established himself in character roles and worked steadily for the next 35 years. He made numerous collaborations with director Jonathan Demme, including roles in Something Wild (1986), Married to the Mob (1988), The Silence of the Lambs (1991), Philadelphia (1993), Beloved (1998), and The Manchurian Candidate (2004).
|
|
Galveston is a coastal resort city and port off the Southeast Texas coast on Galveston Island and Pelican Island in the U.S. state of Texas. The community of 209.3 square miles (542 km2), with a population of 53,695 in 2020, is the county seat of surrounding Galveston County and second-largest municipality in the county. It is also within the Houston–The Woodlands–Sugar Land metropolitan area at its southern end on the northwestern coast of the Gulf of Mexico.
|
|
Francesco Clemente Giuseppe Sparanero (born 23 November 1941), known professionally as Franco Nero, is an Italian actor, producer, and director. His breakthrough role was as the title character in the Spaghetti Western film Django (1966), which made him a pop culture icon and launched an international career that includes over 200 leading and supporting roles in a wide variety of films and television productions.
|
|
Dubrovnik (historically known as Ragusa), is a city in southern Dalmatia, Croatia, by the Adriatic Sea. It is one of the most prominent tourist destinations in the Mediterranean, a seaport and the centre of the Dubrovnik-Neretva County. Its total population is 41,562 (2021 census). In 1979, the city of Dubrovnik was added to the UNESCO list of World Heritage Sites in recognition of its outstanding medieval architecture and fortified old town.
|
|
The mortuary temple of Hatshepsut (Egyptian: Ḏsr-ḏsrw meaning "Holy of Holies") is a mortuary temple built during the reign of Pharaoh Hatshepsut of the Eighteenth Dynasty of Egypt. Located opposite the city of Luxor, it is considered to be a masterpiece of ancient architecture. Its three massive terraces rise above the desert floor and into the cliffs of Deir el-Bahari. Her tomb, KV20, lies inside the same massif capped by El Qurn, a pyramid for her mortuary complex. At the edge of the desert, 1 km (0.62 mi) east, connected to the complex by a causeway lies the accompanying valley temple. Across the river Nile, the whole structure points towards the monumental Eighth Pylon, Hatshepsut's most recognizable addition to the Temple of Karnak and the site from which the procession of the Beautiful Festival of the Valley departed. The temple's twin functions are identified by its axes: its main east-west axis served to receive the barque of Amun-Re at the climax of the festival, while its north-south axis represented the life cycle of the pharaoh from coronation to rebirth.
|
|
Grading plans are required when performing slope repairs, tract grading, site preparation, base excavations, pool excavations, and more.
A grading plan outlines the criteria for land development. Design elevation, surface gradient, lot type, and swale location are the usual components of the plan. The plan also shows the elevations, dimensions, slopes, drainage patterns, etc. In other words, the average plan gives the expert all the information required to manage and inspect the grading process from start to finish. The submission of a grading plan, for approval, is a must for a new building. The location of the building, existing/proposed elevation, drainage arrows, location of erosion control, and details of retaining walls are some of the key elements featured on this plan. Cuts and fills are the most common aspects of any grading plan. The former refers to the material that is removed from the land, and the latter refers to the material used to fill an area. Usually, both are expected to be equal as far as possible.
|
|
A ceramic is any of the various hard, brittle, heat-resistant, and corrosion-resistant materials made by shaping and then firing an inorganic, nonmetallic material, such as clay, at a high temperature. Common examples are earthenware, porcelain, and brick.
The earliest ceramics made by humans were pottery objects (pots, vessels, or vases) or figurines made from clay, either by itself or mixed with other materials like silica, hardened and sintered in fire. Later, ceramics were glazed and fired to create smooth, colored surfaces, decreasing porosity through the use of glassy, amorphous ceramic coatings on top of the crystalline ceramic substrates. Ceramics now include domestic, industrial, and building products, as well as a wide range of materials developed for use in advanced ceramic engineering, such as semiconductors.
The word ceramic comes from the Ancient Greek word κεραμικός (keramikós), meaning "of or for pottery" (from κέραμος (kéramos) 'potter's clay, tile, pottery'). The earliest known mention of the root ceram- is the Mycenaean Greek ke-ra-me-we, workers of ceramic, written in Linear B syllabic script. The word ceramic can be used as an adjective to describe a material, product, or process, or it may be used as a noun, either singular or, more commonly, as the plural noun ceramics.
|
|
Officially founded in 1924, the Manufacturers Standardization Society (MSS) of the Valve and Fittings Industry is a non-profit technical association organized for development and improvement of industry, national and international codes and standards for: Valves, Valve Actuators, Valve Modification, Pipe Fittings, Pipe Hangers, Pipe Supports, Flanges, and Associated Seals.
The primary function of MSS is to provide its members the means to develop engineering standard practices for the use and benefit of the industry and users of its products. The Society, the only organization dedicated solely to the technical needs of the industry, is currently comprised of 24 technical committees to write, revise and reaffirm industry standards.
|
|
Jenette Kahn is an American comic book editor and executive. She joined DC Comics in 1976 as publisher, and five years later was promoted to president. In 1989, she stepped down as publisher and assumed the title of editor-in-chief while retaining the office of president. After 26 years with DC, she left the company in 2002.
|
|
Carmine Michael Infantino (May 24, 1925 – April 4, 2013) was an American comics artist and editor, primarily for DC Comics, during the late 1950s and early 1960s period known as the Silver Age of Comic Books. Among his character creations are the Black Canary and the Silver Age version of DC superhero the Flash with writer Robert Kanigher, the stretching Elongated Man with John Broome, Barbara Gordon the second Batgirl with writer Gardner Fox, Deadman with writer Arnold Drake, and Christopher Chance, the second iteration of the Human Target with Len Wein.
|
|
Kōtoku-in (高徳院) is a Buddhist temple of the Jōdo-shū sect, in the city of Kamakura in Kanagawa Prefecture, Japan. Its mountain name is Taiizan (大異山), and its common temple name is Shōjōsen-ji (清浄泉寺).
The temple is renowned for The Great Buddha of Kamakura (鎌倉大仏, Kamakura Daibutsu), a monumental outdoor bronze statue of Amitābha, which is one of the most famous icons of Japan. It is also a designated National Treasure, and one of the twenty-two historic sites included in Kamakura's proposal for inclusion in UNESCO's World Heritage Sites.
Note - I have been to this temple twice.
|
|
The ASME B16.5 - 1996 Pipe Flanges and Flange Fittings standard covers pressure-temperature ratings, materials, dimensions, tolerances, marking, testing, and methods of designating openings for pipe flanges and flanged fittings.
The standard includes flanges with rating class designations 150, 300, 400, 600, 900, 1500, and 2500 in sizes NPS 1/2 through NPS 24, with requirements given in both metric and U.S units. The Standard is limited to flanges and flanged fittings made from cast or forged materials, and blind flanges and certain reducing flanges made from cast, forged, or plate materials. Also included in this Standard are requirements and recommendations regarding flange bolting, flange gaskets, and flange joints.
|
|
"A Pirate Looks at Forty" is a song written and performed by American popular music singer-songwriter Jimmy Buffett. It was first released on his 1974 album A1A and "Presents to Send You" is the B-side of the single.
Buffett wrote the song about Phillip Clark, at the Chart Room where Buffett first performed after his move to Key West, Florida. The song contains the bittersweet confession of a modern-day, washed-up drug smuggler as he looks back on the first 40 years of his life, expresses lament that his preferred vocation of piracy on the high seas was long gone by the time he was born, and ponders his future.
For radio play, the song was shortened by deleting the fourth verse for the single release. Cash Box said the song has "an almost reggae progression, fine guitar playing and lead solo, moving lyrics." Record World said that "This limitless piece of demographic dauntlessness should ship him out of port under more steam than anything since 'Come Monday.'" The song is one of Buffett's more popular, and is part of "The Big 8" that he has played at almost all of his concerts, and always during the second set.
|
|
Azaleas are flowering shrubs in the genus Rhododendron, particularly the former sections Tsutsusi (evergreen) and Pentanthera (deciduous). Azaleas bloom in the spring (April and May in the temperate Northern Hemisphere, and October and November in the Southern Hemisphere), their flowers often lasting several weeks. Shade tolerant, they prefer living near or under trees. They are part of the family Ericaceae.
|
|
A fiber-optic cable, also known as an optical-fiber cable, is an assembly similar to an electrical cable but containing one or more optical fibers that are used to carry light. The optical fiber elements are typically individually coated with plastic layers and contained in a protective tube suitable for the environment where the cable is used. Different types of cable are used for optical communication in different applications, for example long-distance telecommunication or providing a high-speed data connection between different parts of a building.
|
|
The poinsettia (Euphorbia pulcherrima) is a commercially important flowering plant species of the diverse spurge family Euphorbiaceae. Indigenous to Mexico and Central America, the poinsettia was first described by Europeans in 1834. It is particularly well known for its red and green foliage and is widely used in Christmas floral displays. It derives its common English name from Joel Roberts Poinsett, the first United States minister to Mexico, who is credited with introducing the plant to the US in the 1820s. Poinsettias are shrubs or small trees, with heights of 0.6 to 4 m (2.0 to 13.1 ft). Though often stated to be highly toxic, the poinsettia is not dangerous to pets or children. Exposure to the plant, even consumption, most often results in no effect, though it can cause nausea, vomiting, or diarrhea.
|
|
Bryan Keith "Dexter" Holland (born December 29, 1965) is an American musician, best known as the lead vocalist, rhythm guitarist, primary songwriter and last remaining original member of the rock band the Offspring. He is also the co-founder and former owner of the record label Nitro Records, and creator of the hot sauce Gringo Bandito, launched in 2004. In 2017, Holland attained a PhD in molecular biology.
|
|
The McCabe–Thiele method is a chemical engineering technique to model the separation of two substances by a distillation column. It uses the fact that the composition at each theoretical tray is completely determined by the mole fraction of one of the two components. This method is based on the assumption of constant molar overflow, which requires that:
- The molar heats of vaporization of the feed components are equal;
- For every mole of liquid vaporized, a mole of vapor is condensed, and,
- Heat effects such as heat of solution are negligible.
The method was first published by Warren L. McCabe and Ernest Thiele in 1925, both of whom were working at the Massachusetts Institute of Technology (MIT) at the time.
|
|
Calendar Man (Julian Gregory Day) is a supervillain appearing in American comic books published by DC Comics, as an enemy of the superhero Batman, belonging to the collective of adversaries that make up Batman's rogues gallery. Calendar Man is known for committing crimes that correspond with holidays and significant dates. He often wears costumes to correlate with the date of the designated crime. His name, in itself, is a joke, referencing both the Julian and Gregorian calendars. In his debut, the character was presented as a joke villain, but in later years, writers developed Calendar Man as a dark, disturbed serial killer who toys with Batman.
|
|
The Kingpin (Wilson Grant Fisk) is a supervillain appearing in American comic books published by Marvel Comics. The character was created by Stan Lee and John Romita Sr., and first appeared in The Amazing Spider-Man #50 (cover-dated July 1967). The "Kingpin" name is a reference to the crime lord title in Mafia slang nomenclature.
One of the most feared, dangerous and powerful crime lords in the Marvel Universe, usually depicted as New York City's crime overlord, the Kingpin was introduced as an adversary of Spider-Man, but later went on to be the archenemy of Daredevil, as well as a recurring foe of the Punisher and his adoptive daughter Echo. He was married to Vanessa Fisk, who frequently expressed her disapproval of his criminal activities, and later to Typhoid Mary Fisk, and is the father of Richard Fisk and Butch Pharris, the latter of whom succeeded him as the Kingpin following his retirement. His traditional attire consists of his signature white suit jacket and cane, though his appearance has been changed over the years. Across all iterations, the Kingpin is depicted with an extraordinarily heavyset appearance and a bald head. The character is not simply obese but also heavily-muscled (like a sumo wrestler) and a formidable hand-to-hand combatant. Despite this, his size has been regularly mocked, especially by Spider-Man.
The character has been substantially adapted from the comics into various forms of media, including feature films, television series, and video games. The Kingpin was portrayed by John Rhys-Davies in the 1989 television film The Trial of the Incredible Hulk, and by Michael Clarke Duncan in the 2003 feature film Daredevil, who also voiced the character in Spider-Man: The New Animated Series. Vincent D'Onofrio portrays Wilson Fisk in the Marvel Cinematic Universe (MCU) franchise, having appeared in the television series Daredevil (2015–2018). Liev Schreiber voiced the Kingpin in the 2018 animated film Spider-Man: Into the Spider-Verse. In 2009, the Kingpin was ranked as IGN's 10th Greatest Comic Book Villain of All Time.
|
|
In electricity (electromagnetism), the electric susceptibility is a dimensionless proportionality constant that indicates the degree of polarization of a dielectric material in response to an applied electric field. The greater the electric susceptibility, the greater the ability of a material to polarize in response to the field, and thereby reduce the total electric field inside the material(and store energy). It is in this way that the electric susceptibility influences the electric permittivity of the material and thus influences many other phenomena in that medium, from the capacitance of capacitors to the speed of light.
|
|
The Ljungström turbine (Ljungströmturbinen) is a steam turbine. It is also known as the STAL turbine, from the company name STAL (Swedish: Svenska Turbinfabriks Aktiebolaget Ljungström). The technology has had numerous uses since its conception, from power plants to vehicles as large as the supertanker Seawise Giant.
It was invented circa 1908 by the Swedish brothers Birger Ljungström (1872–1948) and Fredrik Ljungström (1875–1964). The Ljungström brothers were creative, versatile inventors, typical of the 19th century. They not only named the turbine type, but also an early form of a bicycle.
|
|
The basking shark (Cetorhinus maximus) is the second-largest living shark and fish, after the whale shark, and one of three plankton-eating shark species, along with the whale shark and megamouth shark. Adults typically reach 7.9 m (26 ft) in length. It is usually greyish-brown, with mottled skin, with the inside of the mouth being white in color. The caudal fin has a strong lateral keel and a crescent shape. Other common names include bone shark, elephant shark, sail-fish, and sun-fish. In Orkney it is called hoe-mother (contracted homer), meaning "the mother of the picked dog-fish".
|
|
A drogue (also known as a storm drogue) is a device trailed behind a boat on a long line attached to the stern. A drogue is used to slow the boat down in a storm and to prevent the hull from becoming side-on to the waves. A boat that has deployed a drogue should not overspeed down the slope of a wave and crash into the next one, nor will the vessel broach. By slowing the vessel, the drogue makes the vessel easier to control in heavy weather and will help to prevent pitchpoling.
A drogue works by providing substantial resistance when dragged through the water. An alternative device is the sea anchor, a much larger item than a drogue, which is streamed from the bows. The advantage of the sea anchor is that the bows of a yacht are invariably finer than the stern, thereby giving a safer and more comfortable experience in a storm. Both drogues and sea anchors will have "tripping lines" to aid recovery of the drogue after deployment.
|
|
Amine gas treating, also known as amine scrubbing, gas sweetening and acid gas removal, refers to a group of processes that use aqueous solutions of various alkylamines (commonly referred to simply as amines) to remove hydrogen sulfide and carbon dioxide from gases. It is a common unit process used in refineries, and is also used in petrochemical plants, natural gas processing plants and other industries.
Processes within oil refineries or chemical processing plants that remove Hydrogen Sulfide are referred to as "sweetening" processes because the odor of the processed products is improved by the absence of "sour" hydrogen sulfide. An alternative to the use of amines involves membrane technology. However, membrane separation is less attractive due to the relatively high capital and operating costs as well as other technical factors.
Many different amines are used in gas treating:
- Diethanolamine (DEA)
- Monoethanolamine (MEA)
- Methyldiethanolamine (MDEA)
- Diisopropanolamine (DIPA)
- Aminoethoxyethanol (Diglycolamine) (DGA)
The most commonly used amines in industrial plants are the alkanolamines DEA, MEA, and MDEA. These amines are also used in many oil refineries to remove sour gases from liquid hydrocarbons such as liquified petroleum gas (LPG).
|
|
Luis Walter Alvarez (June 13, 1911 – September 1, 1988) was an American experimental physicist, inventor, and professor who was awarded the Nobel Prize in Physics in 1968 for his discovery of resonance states in particle physics using the hydrogen bubble chamber. In 2007 the American Journal of Physics commented, "Luis Alvarez was one of the most brilliant and productive experimental physicists of the twentieth century."
|
|
Charles Hard Townes (July 28, 1915 – January 27, 2015) was an American physicist. Townes worked on the theory and application of the maser, for which he obtained the fundamental patent, and other work in quantum electronics associated with both maser and laser devices. He shared the 1964 Nobel Prize in Physics with Nikolay Basov and Alexander Prokhorov. Townes was an adviser to the United States Government, meeting every US president from Harry S. Truman (1945) to Bill Clinton (1999).
|
|
Prepregs are laminate composites of fiber sheets that are impregnated with polymer resins (plastics) that have not been fully cured. Fiber sheets are often fiberglass, carbon fiber, or polyaramid (Kevlar). Materials in this form are often called B-staged. The impregnating polymer resins may be thermoplastic or thermosets. These are made by creating layered soft and flexible sheets of materials. Prepregs are often tacky. These prepreg sheets remain flexible and can be cut into any shape. They are easy to handle and can be bent over a mandrel to make complex shapes that would be difficult to make by a traditional process. The most common way to make a composite part from prepreg reinforcement is to layer the uncured prepreg reinforcement into or onto a mold, vacuum bag the mold and laminate, and then cure it in an autoclave or an oven. The curing process can be at several temperatures with holds in temperature depending on the composition of the prepreg. Many prepregs are based on epoxy or phenolic resin, but many thermosets may be used including high-tech materials like polyimide.
|
|
The phrase “three sheets to the wind” is derived from sailing ships. The 'sheet' in the phrase uses the nautical meaning of a rope controlling the trim of the sails. A sail (usually a jib sail) is said to be sheeted to the wind when it is set to backfill, set to the opposite side of the ship from normal use.
A jib sail is not normally kept in backfill position but, in a major storm when a ship must be kept “hove-to” (kept as much as possible in a standstill position and not being blown forward), the helm or wheel is lashed to windward, and the jibs are sheeted to the windward side of the ship (sheeted to the wind). This causes the ship to hold sideways to the wind and waves to minimize the distance that the ship is blown off course during a storm. While hove-to, the ship is at the mercy of the wind and waves, and the crew has no control of it other than to hold it in place while it is rolled by waves.
As a storm gets stronger, more backfill counterbalancing is required to hold the ship in position, and additional jibs are sheeted to the wind to maintain the ship at a standstill. When a ship has three jibs sheeted to the wind, it is being held sideways to wind and waves in strong storm conditions with very high waves, causing it to roll wildly from side to side with each wave, in continuous danger of capsizing. Hence, "three sheets to the wind" has been used to describe a highly inebriated person who is no longer in control and is in danger of falling over.
|
|
Electrocardiography is the process of producing an electrocardiogram (ECG or EKG), a recording of the heart's electrical activity through repeated cardiac cycles. It is an electrogram of the heart which is a graph of voltage versus time of the electrical activity of the heart using electrodes placed on the skin. These electrodes detect the small electrical changes that are a consequence of cardiac muscle depolarization followed by repolarization during each cardiac cycle (heartbeat). Changes in the normal ECG pattern occur in numerous cardiac abnormalities, including cardiac rhythm disturbances (such as atrial fibrillation and ventricular tachycardia), inadequate coronary artery blood flow (such as myocardial ischemia and myocardial infarction), and electrolyte disturbances (such as hypokalemia and hyperkalemia).
|
|
Stall torque is the torque produced by a mechanical device whose output rotational speed is zero. It may also mean the torque load that causes the output rotational speed of a device to become zero, i.e., to cause stalling. Electric motors, steam engines and hydrodynamic transmissions are all capable of developing torque when stalled.
Aberzombie, you get up too early. :-)
|
|
Naval architecture, or naval engineering, is an engineering discipline incorporating elements of mechanical, electrical, electronic, software and safety engineering as applied to the engineering design process, shipbuilding, maintenance, and operation of marine vessels and structures. Naval architecture involves basic and applied research, design, development, design evaluation (classification) and calculations during all stages of the life of a marine vehicle. Preliminary design of the vessel, its detailed design, construction, trials, operation and maintenance, launching and dry-docking are the main activities involved. Ship design calculations are also required for ships being modified (by means of conversion, rebuilding, modernization, or repair). Naval architecture also involves formulation of safety regulations and damage-control rules and the approval and certification of ship designs to meet statutory and non-statutory requirements.
|
|
Thermosiphon (or thermosyphon) is a method of passive heat exchange, based on natural convection, which circulates a fluid without the necessity of a mechanical pump. Thermosiphoning is used for circulation of liquids and volatile gases in heating and cooling applications such as heat pumps, water heaters, boilers and furnaces. Thermosiphoning also occurs across air temperature gradients such as those utilized in a wood fire chimney or solar chimney.
This circulation can either be open-loop, as when the substance in a holding tank is passed in one direction via a heated transfer tube mounted at the bottom of the tank to a distribution point—even one mounted above the originating tank—or it can be a vertical closed-loop circuit with return to the original container. Its purpose is to simplify the transfer of liquid or gas while avoiding the cost and complexity of a conventional pump.
|
|
| 1 person marked this as a favorite. |
The cryotron is a switch that operates using superconductivity. The cryotron works on the principle that magnetic fields destroy superconductivity. This simple device consists of two superconducting wires (e.g. tantalum and niobium) with different critical temperature (Tc). The cryotron was invented by Dudley Allen Buck of the Massachusetts Institute of Technology Lincoln Laboratory.
As described by Buck, a straight wire of tantalum (having lower Tc) is wrapped around with a wire of niobium in a single layer coil. Both wires are electrically isolated from each other. When this device is immersed in a liquid helium bath both wires become superconducting and hence offer no resistance to the passage of electric current. Tantalum in superconducting state can carry large amount of current as compared to its normal state. Now when current is passed through the niobium coil (wrapped around tantalum) it produces a magnetic field, which in turn reduces (kills) the superconductivity of the tantalum wire and hence reduces the amount of the current that can flow through the tantalum wire. Hence one can control the amount of the current that can flow in the straight wire with the help of small current in the coiled wire. We can think of the tantalum straight wire as a "gate" and the coiled niobium as a "control".
The article by Buck includes descriptions of several logic circuits implemented using cryotrons, including: one stage of a binary adder, carry network, binary accumulator stage, and two stages of a cryotron stepping register.
A planar cryotron using thin films of lead and tin was developed in 1957 by John Bremer at General Electric's General Engineering Lab in Schenectady, New York. This was one of the first integrated circuits, although using superconductors rather than semiconductors. In the next few years, a demonstration computer was made and arrays with 2000 devices operated. A short history of this work is in the November 2007 newsletter of the IEEE History Center.
Juri Matisoo developed a version of the cryotron incorporating a Josephson junction switched by the magnetic field from a control wire. He also explained the shortcomings of traditional cryotrons in which the superconductive material must transition between superconducting and normal states to switch the device, and thus switch relatively slowly. Matisoo's cryotron switched between a conducting state in which 'pair tunneling' of electrons through the gate took place and a 'resistive' state where only single electrons were able to tunnel. The circuit was (like the traditional cryotron) capable of some amplification (i.e gain greater than unity) had a switching rate of less than 800 picoseconds. Although the requirement for cryogenic cooling limited its practicality, it wasn't until the late 2010s that commercial transistors came close to matching this performance.
There have been periods of renewed interest in various types of cryotron. IBM experimented with using them for limited applications in supercomputers during the 1980s, and (as of 2020) there has been some investigation of their potential applications both to I/O and logic in prototype quantum computers.
|
|
Texas Instruments Incorporated (TI) is an American technology company headquartered in Dallas, Texas, that designs and manufactures semiconductors and various integrated circuits, which it sells to electronics designers and manufacturers globally. It is one of the top 10 semiconductor companies worldwide based on sales volume. The company's focus is on developing analog chips and embedded processors, which account for more than 80% of its revenue. TI also produces TI digital light processing technology and education technology products including calculators, microcontrollers, and multi-core processors. The company holds 45,000 patents worldwide as of 2016.
Texas Instruments emerged in 1951 after a reorganization of Geophysical Service Incorporated, a company founded in 1930 that manufactured equipment for use in the seismic industry, as well as defense electronics. TI produced the world's first commercial silicon transistor in 1954, and the same year designed and manufactured the first transistor radio. Jack Kilby invented the integrated circuit in 1958 while working at TI's Central Research Labs. TI also invented the hand-held calculator in 1967, and introduced the first single-chip microcontroller in 1970, which combined all the elements of computing onto one piece of silicon.
In 1987, TI invented the digital light processing device (also known as the DLP chip), which serves as the foundation for the company's DLP technology and DLP Cinema. TI released the popular TI-81 calculator in 1990, which made it a leader in the graphing calculator industry. Its defense business was sold to Raytheon Company in 1997; this allowed TI to strengthen its focus on digital solutions. After the acquisition of National Semiconductor in 2011, the company had a combined portfolio of 45,000 analog products and customer design tools. In the stock market, Texas Instruments is often regarded as an indicator for the semiconductor and electronics industry as a whole, since the company sells to more than 100,000 customers.
|
|
Gaga (Hebrew: גע גע literally 'touch touch') (also: ga-ga, gaga ball, or ga-ga ball) is a variant of dodgeball that is played in a gaga "pit". The game combines dodging, striking, running, and jumping, with the objective of being the last person standing. Players hit the ball at each other with their hands, and are eliminated if the ball strikes them on or below the knee. The game can be played by a group of individual players or with teams, as well as in one-on-one matches. Rules, ball types, pit surfaces, and pit sizes can vary widely at different venues.
Lady Dodgeball? :-)
|
|
In classical mechanics, Routh's procedure or Routhian mechanics is a hybrid formulation of Lagrangian mechanics and Hamiltonian mechanics developed by Edward John Routh. Correspondingly, the Routhian is the function which replaces both the Lagrangian and Hamiltonian functions. Routhian mechanics is equivalent to Lagrangian mechanics and Hamiltonian mechanics, and introduces no new physics. It offers an alternative way to solve mechanical problems.
|
|
Gardner Francis Cooper Fox (May 20, 1911 – December 24, 1986) was an American writer known best for creating numerous comic book characters for DC Comics. He is estimated to have written more than 4,000 comics stories, including 1,500 for DC Comics. Fox was also a science fiction author and wrote many novels and short stories.
Fox is known as the co-creator of DC Comics heroes Barbara Gordon, the original Flash, Hawkman, Doctor Fate, Zatanna and the original Sandman, and was the writer who first teamed several of those and other heroes as the Justice Society of America, and later recreated the team as the Justice League of America. Fox introduced the concept of the Multiverse to DC Comics in the 1961 story "Flash of Two Worlds!".
|
|
| 1 person marked this as a favorite. |
The Wankel engine is a type of internal combustion engine using an eccentric rotary design to convert pressure into rotating motion. The concept was invented and proven by German engineer Felix Wankel, and the commercially feasible engine designed by German engineer Hanns-Dieter Paschke. The Wankel engine's rotor, which creates the turning motion, is similar in shape to a Reuleaux triangle, with the sides having less curvature. The rotor spins inside a figure-eight-like epitrochoidal housing, around a fixed toothed gearing. The midpoint of the rotor moves in a circle around the output shaft, spinning the shaft via a cam.
Due to its inherent poor thermodynamics, the Wankel engine has a significantly worse thermal efficiency and worse exhaust gas behaviour when compared against the four-stroke reciprocating piston engine, which is why the Wankel engine has seen limited use since its introduction in the 1960s. However, its advantages of compact design, smoothness, lower weight, and fewer parts over the reciprocating piston internal combustion engines make the Wankel engine suited for applications such as chainsaws, auxiliary power units, loitering munitions, aircraft, jet skis, snowmobiles, and range extenders in cars. In the past, the Wankel engine has also been used in road vehicles such as motorcycles, and racing cars.