I'll Draw your Pathfinder / RPG Magic Item


Artwork & Crafting

151 to 200 of 275 << first < prev | 1 | 2 | 3 | 4 | 5 | 6 | next > last >>

Tirq wrote:

Hey, cmh, how ya been? I haven't been here for a while... Any way, do you think you could do another thing for me?

** spoiler omitted **

Ok, here is my take Whirlpool. If you have any changes you want me to make let me know.

The Exchange

That looks great, thanks! I'll let people know about this thread more often.


Tirq wrote:
That looks great, thanks! I'll let people know about this thread more often.

Glad you like it.

I enjoy artistic challenges and I've found I do weapons quite easily, so if anybody has something they want done let me know.


Giving this a bump to see if anybody wants some artwork done.
And here is my latest sword.
You can also find it on my shop on shapeways here.


Giving this a bump to see if anybody wants some artwork done.
And if your interested in work, here is a dragon I made.
And here are my miniatures.


Giving this a bump to see if anybody wants some artwork done.
And if your interested in what I make, here is my latest piece


Giving this a bump to see if anybody is interested in having some artwork done.

and here is my miniature site.


Giving this a bump to see if anybody is interested in having some artwork done.

and here is a goblin and dragon I made if you want to see my artwork.


Hi again =)

Would you be willing to draw a few holy symbols?


Orthos wrote:

Hi again =)

Would you be willing to draw a few holy symbols?

Sure, tell me what you want drawn.


1. Weaver spider design. On silver octagon pendant.

2. Small bird of prey (osprey or falcon) design, in flight and clutching a lightning bolt in its talons. On circular pendant of scorched steel.

3. Gauntleted fist clutching a sword hilt. Thorned vines wrapped around wrist. On adamantine black disk.

4. Silver dragon wrapped around a large shield, head visible around or over the top, claws and tail clutching the edges. On shield-shaped silver badge.

5. Blue lily, covered in frost. On marble pendant.

6. Skeletal humanoid hand holding an hourglass. Half of the grains have drained into the lower chamber. On grey stone or marble (think gravestone) square.

May have more after these are done, if you like =)


Orthos wrote:

1. Weaver spider design. On silver octagon pendant.

2. Small bird of prey (osprey or falcon) design, in flight and clutching a lightning bolt in its talons. On circular pendant of scorched steel.

3. Gauntleted fist clutching a sword hilt. Thorned vines wrapped around wrist. On adamantine black disk.

4. Silver dragon wrapped around a large shield, head visible around or over the top, claws and tail clutching the edges. On shield-shaped silver badge.

5. Blue lily, covered in frost. On marble pendant.

6. Skeletal humanoid hand holding an hourglass. Half of the grains have drained into the lower chamber. On grey stone or marble (think gravestone) square.

May have more after these are done, if you like =)

Ok I will get to these as soon as I have time.


Coolness =)


May I make a humble request?

A portrait of an elf in platemail. This was my character during DD/ ADD 1st ed.

The elf is closer to The Lord of the Rings type of elves than the elves from Paizo. Tall and thin. Blond hair with large curls that goes down just below his shoulders. Blue eyes and fair skin.

The platemail is covered in white dragon hide. The wings were shrunk down to the elf's size. The head was also shrunk down to make it usable as a helm. A belt around his waist holds two long swords.

Thank You in advance.


Robert Hauglin 13 wrote:

May I make a humble request?

A portrait of an elf in platemail. This was my character during DD/ ADD 1st ed.

The elf is closer to The Lord of the Rings type of elves than the elves from Paizo. Tall and thin. Blond hair with large curls that goes down just below his shoulders. Blue eyes and fair skin.

The platemail is covered in white dragon hide. The wings were shrunk down to the elf's size. The head was also shrunk down to make it usable as a helm. A belt around his waist holds two long swords.

Thank You in advance.

I'll get to as soon as I can.


Orthos wrote:

1. Weaver spider design. On silver octagon pendant.

2. Small bird of prey (osprey or falcon) design, in flight and clutching a lightning bolt in its talons. On circular pendant of scorched steel.

3. Gauntleted fist clutching a sword hilt. Thorned vines wrapped around wrist. On adamantine black disk.

4. Silver dragon wrapped around a large shield, head visible around or over the top, claws and tail clutching the edges. On shield-shaped silver badge.

5. Blue lily, covered in frost. On marble pendant.

6. Skeletal humanoid hand holding an hourglass. Half of the grains have drained into the lower chamber. On grey stone or marble (think gravestone) square.

May have more after these are done, if you like =)

Here is a my take on the Blue Lily.

I made this rather quickly so let me know if you want changes.


actually, if your willing to do another holy symbol... >.>

something akin to:
Image

yea... i can't draw... >.> but, a red iris'd slit eye, on a black relief of some sort.


IejirIsk wrote:

actually, if your willing to do another holy symbol... >.>

something akin to:
Image

yea... i can't draw... >.> but, a red iris'd slit eye, on a black relief of some sort.

Sure, I'll get to it as soon as I can.


Cmh wrote:

Here is a my take on the Blue Lily.

I made this rather quickly so let me know if you want changes.

Interesting =)


Orthos wrote:

1. Weaver spider design. On silver octagon pendant.

2. Small bird of prey (osprey or falcon) design, in flight and clutching a lightning bolt in its talons. On circular pendant of scorched steel.

3. Gauntleted fist clutching a sword hilt. Thorned vines wrapped around wrist. On adamantine black disk.

4. Silver dragon wrapped around a large shield, head visible around or over the top, claws and tail clutching the edges. On shield-shaped silver badge.

5. Blue lily, covered in frost. On marble pendant.

6. Skeletal humanoid hand holding an hourglass. Half of the grains have drained into the lower chamber. On grey stone or marble (think gravestone) square.

May have more after these are done, if you like =)

Here is your 1st and 3rd request.

Let me know if you want any changes.


More focus on the symbol itself, rather than showing the whole pendant and chain. As is the emblems themselves are rather small. Look good otherwise though.


Orthos wrote:
More focus on the symbol itself, rather than showing the whole pendant and chain. As is the emblems themselves are rather small. Look good otherwise though.

Ok I resized it to focus more on the symbols.

And here is dragon symbol.


IejirIsk wrote:

actually, if your willing to do another holy symbol... >.>

something akin to:
Image

yea... i can't draw... >.> but, a red iris'd slit eye, on a black relief of some sort.

Ok, IejirIsk here is what I came up with.

Let me know if you want any changes.


Cmh wrote:
Orthos wrote:
More focus on the symbol itself, rather than showing the whole pendant and chain. As is the emblems themselves are rather small. Look good otherwise though.

Ok I resized it to focus more on the symbols.

And here is dragon symbol.

Awesome, nicely done =D


alright, looks good. now something a little different... can you put (another pic) it on a stone altar? with the eye facing the camera? and thanks


IejirIsk wrote:
alright, looks good. now something a little different... can you put (another pic) it on a stone altar? with the eye facing the camera? and thanks

Here is my take on a alter.

if you want any changes let me know.


Orthos wrote:
Cmh wrote:
Orthos wrote:
More focus on the symbol itself, rather than showing the whole pendant and chain. As is the emblems themselves are rather small. Look good otherwise though.

Ok I resized it to focus more on the symbols.

And here is dragon symbol.

Awesome, nicely done =D

Orthos, here is another of your requests.

I also liked the dragon symbol so I also put it on shapeways


arg, can't see it full size, was thinking of it more as the main piece, instead of something to put things on, though... i can use that too, thanks.


IejirIsk wrote:
arg, can't see it full size, was thinking of it more as the main piece, instead of something to put things on, though... i can use that too, thanks.

I can change if you want, its not that hard with photoshop.


dont get rid of that one, have a use for it too, like i said XD.

but, think of a statue thing along a forested road. with the eye looking out, and filling the statue.


IejirIsk wrote:

dont get rid of that one, have a use for it too, like i said XD.

but, think of a statue thing along a forested road. with the eye looking out, and filling the statue.

Ok, here is my first take on your statue, if you want any changes let me know.


Robert Hauglin 13 wrote:

May I make a humble request?

A portrait of an elf in platemail. This was my character during DD/ ADD 1st ed.

The elf is closer to The Lord of the Rings type of elves than the elves from Paizo. Tall and thin. Blond hair with large curls that goes down just below his shoulders. Blue eyes and fair skin.

The platemail is covered in white dragon hide. The wings were shrunk down to the elf's size. The head was also shrunk down to make it usable as a helm. A belt around his waist holds two long swords.

Thank You in advance.

Ok, here is my attempt at your request, I hope you like it.

And if you would like any changes let me know.


Orthos wrote:

1. Weaver spider design. On silver octagon pendant.

2. Small bird of prey (osprey or falcon) design, in flight and clutching a lightning bolt in its talons. On circular pendant of scorched steel.

3. Gauntleted fist clutching a sword hilt. Thorned vines wrapped around wrist. On adamantine black disk.

4. Silver dragon wrapped around a large shield, head visible around or over the top, claws and tail clutching the edges. On shield-shaped silver badge.

5. Blue lily, covered in frost. On marble pendant.

6. Skeletal humanoid hand holding an hourglass. Half of the grains have drained into the lower chamber. On grey stone or marble (think gravestone) square.

May have more after these are done, if you like =)

Here is your falcon symbol, and if you want any changes let me know.


Giving this a bump to see if anybody is interested in having some artwork done.

And here is a sword I made for fun.


Cmh wrote:
Robert Hauglin 13 wrote:

May I make a humble request?

A portrait of an elf in platemail. This was my character during DD/ ADD 1st ed.

The elf is closer to The Lord of the Rings type of elves than the elves from Paizo. Tall and thin. Blond hair with large curls that goes down just below his shoulders. Blue eyes and fair skin.

The platemail is covered in white dragon hide. The wings were shrunk down to the elf's size. The head was also shrunk down to make it usable as a helm. A belt around his waist holds two long swords.

Thank You in advance.

Ok, here is my attempt at your request, I hope you like it.

And if you would like any changes let me know.

Sorry I took so long to get back to you, as my family and I were on vacation. No changes needed, you are fantastic! Thank You!


Robert Hauglin 13 wrote:
Cmh wrote:
Robert Hauglin 13 wrote:

May I make a humble request?

A portrait of an elf in platemail. This was my character during DD/ ADD 1st ed.

The elf is closer to The Lord of the Rings type of elves than the elves from Paizo. Tall and thin. Blond hair with large curls that goes down just below his shoulders. Blue eyes and fair skin.

The platemail is covered in white dragon hide. The wings were shrunk down to the elf's size. The head was also shrunk down to make it usable as a helm. A belt around his waist holds two long swords.

Thank You in advance.

Ok, here is my attempt at your request, I hope you like it.

And if you would like any changes let me know.
Sorry I took so long to get back to you, as my family and I were on vacation. No changes needed, you are fantastic! Thank You!

That's alright, I enjoyed making it.

And if you have anymore requests let me know.


Actually, I do have something, but will pm deatials.


IejirIsk wrote:
Actually, I do have something, but will pm deatials.

That's fine, I'll get started as soon as I can.

And if anyone else has a request let me know.


IejirIsk wrote:
Actually, I do have something, but will pm deatials.

Here is your request and if you want any changes let me know.

And if anyone else has a request let me know.


Giving this a bump to see if anybody is interested in having some artwork done.

And here is something. I made for fun.


Just giving this another bump to see if anybody is interested in having some artwork done.

And if your interested in what I'm doing here are some short stories I wrote.


Just giving this another bump to see if anybody is interested in having some artwork done.

And if your interested here is some of my artwork


There are some good basics in there with stuff like this: http://cmhart.deviantart.com/art/Magic-Cube-367573989

But tbh it looks like the stuff needs more skinning detail work to really bring it home. like working on adding textures to things and such for more realistic and three dimensionality. That's just IMHO though.


kmal2t wrote:

There are some good basics in there with stuff like this: http://cmhart.deviantart.com/art/Magic-Cube-367573989

But tbh it looks like the stuff needs more skinning detail work to really bring it home. like working on adding textures to things and such for more realistic and three dimensionality. That's just IMHO though.

That's one area I'm still working on.

As for adding texture if you have any tips you like to share I'd appreciate it.

And looking at my old stuff I've improved a lot.


I'm by no means a modeller, but one thing I do know is there a lot of people who could tell you a LOT about it in gaming communities, especially those in games that allow open source creation like Half-Life 2/Source Mod. If you can find some of those communities those people have endless tutorials and advice on how to make models and skin stuff.


kmal2t wrote:
I'm by no means a modeller, but one thing I do know is there a lot of people who could tell you a LOT about it in gaming communities, especially those in games that allow open source creation like Half-Life 2/Source Mod. If you can find some of those communities those people have endless tutorials and advice on how to make models and skin stuff.

Thanks, I have looked around the net before but for some reason I never thought to check out gaming communities.


Just giving this another bump to see if anybody is interested in having some artwork done.

And here is some art I'm working on.

Sczarni

There were two magic items and a boat that I was looking for, if you're interested PM me and I can give you the details.


Lunalynx wrote:
There were two magic items and a boat that I was looking for, if you're interested PM me and I can give you the details.

Sure, I am always interested in new challenges.

If you want to post the details here, I check here regularly.


Lunalynx wrote:
There were two magic items and a boat that I was looking for, if you're interested PM me and I can give you the details.

Ok, here is my first attempt at the coin purse and butterfly symbol.

if you want any changes let me know.

151 to 200 of 275 << first < prev | 1 | 2 | 3 | 4 | 5 | 6 | next > last >>
Community / Forums / Gamer Life / Entertainment / Artwork & Crafting / I'll Draw your Pathfinder / RPG Magic Item All Messageboards

Want to post a reply? Sign in.