Inked Adventures

Inked Adventures: 3D Furniture For Dungeons PDF

Inked Adventures

Contained in this pack is a selection of easy-to-assemble dungeon furniture for use with 25/28/30mm figures, suitable for use with any 1-inch=5-ft floor plans and battle-maps.

Printed once, the four pages of this pack will generate:
• 2 bookcases, 2 chests
• 1 feasting table with 2 benches
• 6 beds
• 2 tables with 6 chairs

Most of the pieces are based on simple boxes, so complex instructions are not necessary. All of the original art is hand-drawn in a style which adapts well to greyscale printing (if required). Enjoy!
—Billiam Babble of Inked Adventures, 2011.

The 3D furniture in this pack is ideal for use with Inked Adventures: Modular Dungeon Cut-Up Sections.

Arcane Library Tile and Sections PDF

Inked Adventures

This is a pack of printable PDFs in a ZIP file (29 MB). The PDFs include A4 and US Letter page formats as well as full colour and printer line-art-only designs.

0. Introduction
1. Arcane Library
   The four page PDF will print one large library “tile”. These are four corners of one multilevel room. Once trimmed, they create a 18×13 in tile (including 3D-effect walls). The floorspace equates to 17 squares by 12 squares, in mapping terms this 85x60ft when 1inch = 5ft. There are four levels, concentric walkways, each linked by steps. The design works equally well as a dungeon room or a building interior. Entrances and exits can be added using the Connectors and Door Counters in the gaps between the bookcases
2. Small Rooms
   These antechamber designs are a Study, Scriptorium, Abandoned Archive and a Tome Vault. The two page PDF will print three of each room.
3. Connectors and Door Counters
   Connector archways, doorways and doors, shaded to compliment different flagstone colours.
4. Bonus section: Bookish Hallway
   This is an optional room-section which fits in with the library theme of this pack. The Bookish Hallway can be act as a gallery, corridor or secret library with four small exits (perhaps to the Small Rooms)

Paper Format / Colour vs. B&W Line Art
The PDFs included are in A4 and US Letter size formats (in separate folders). As well as colour designs, the original black and white line art has been included for players who wish to save on printer ink, or those that like to colour-in their gaming accessories (especially rewarding for very young players and their artistic parents!).
Scale 1in/25mm = 5ft for use with 25/28/30mm figures.
Compatible with other 1-inch scale plans, battlemats and ideal for use with other hand drawn Inked Adventures Dungeon Sections products.

Inked Adventures—Blocks: Rustic Timber Interior PDF

Inked Adventures

Inked Adventures Blocks Rustic Timber Interior is intended for improvising referees who need to create a building interior quickly. They can be used in a free form way or glued to a grid as a permanent structure. The blocks are designed to be just slightly higher than 25-28mm minis, but these heights are purely representational. This pack caters for the insides of rustic medieval buildings, wattle and daub, timber framed structures. This can be a hovel, a dwelling, tavern or inn, or a wing in a manor. They can also be used to represent outer building walls and doors on a street.

Scale
The set is based on the standard 1 inch = 5 feet in scale for 25/28mm figures, this should be compatible with other scenery, floor plans and battle mats. The pieces fit within 1 inch grid squares - width dimensions are slightly shorter than 1 inch per side - this worked much better in the playtests, especially where many blocks were used.

Models included in the main PDF (thumbnail preview)

• 2x1 sqrs 10’ long wall (10'x5')
• 3x1 sqrs 15’ long wall (15’x5’)
• 1x1 sqrs 5' wall / pillar (5'x5')
• 2x2 sqrs 10’ square wall block (10’x10’)
• L-shaped corner piece (10'x10', 5' thick)
• 2x1 sqrs 10' steps (10'x5')
• Doors
• Window blocks
• Also: Wooden floor (grid / battle mat 4 PDFs in zip file)

A4 and Letter sized PDFs provided.

Assembly (instructions also provided in PDF)
Print to card or heavy paper (selecting pages in the PDF carefully first). Trim with scissors and glue the tabs. The designs are all cuboid and don't require scenery modelling experience or elaborate instructions. However, the L-block and Steps will require a little extra thought because they are more irregular in shape. Confident modellers may wish to change the location and sizes of the tabs to meet their preferences.
Weighting movable blocks: we recommend a loose weight, such as a coin or metal washer inserted into the blocks during assembly, this counters “nudge and sneeze damage” during tabletop play. Blu-tack and temporary sticking substances may also help.

Flip for raised floor
The blocks can be used as interior walls, however they have a dual function. They have two different designs for the “top” face. Most of the blocks can be flipped over to represent a raised area or second storey with a wooden floor. Your inn can have a stage or a sleeping area, adjoined with the steps block (or the referee can state that there is a ladder – like in a hovel or cottage)

Please Note: This is a print-and-play accessory only. It is not intended for digital editing or use with VTT software.
Compatible with most dungeon floor plan and battlemat products using the 1 inch scale.
Usage and Copyright:
Inked Adventures and the artist Billiam Babble retain the rights to the original art work supplied herein. The customer is purchasing this product for “personal use” only – or to share with a small playing group – within reasonable limits. If you would like to use any element of this pack in a commercial or free-to-use product, please do not hesitate to contact Inked Adventures to discuss options.

Blocks PDF

Inked Adventures

Inked Adventures Blocks is a hand drawn printable play aid (to card or paper) for dungeon masters and players of fantasy tabletop games. The blocks are very easy to assemble, reusable and modular, to adapt to the DM's different dungeon maps.

Low resolution preview of pages in the PDF

Models included in this PDF

• 10’ square wall block (10’x10’)
• L-shaped corner piece (10'x10', 5' thick )
• 10’ long wall (10'x5' )
• 15’ long wall (15’x5’ )
• 5' wall / pillar (5'x5')
• 15' steps (15'x5')
• Flagstone floor (grid / battle mat)
• Doors, single and double.

A4 and Letter sized PDFs provided.

Scale
The set is based on the standard 1 inch = 5 feet in scale for 25/28mm figures, this should be compatible with other dungeon scenery, floor plans and battle mats. The pieces fit within 1 inch grid squares - width dimensions are slightly shorter than 1 inch per side - this worked much better in the playtests, especially where many blocks were used.

Appearance and use in play
The tops of the wall blocks are dark grey to cleanly divide the room areas, when viewed from above. The dark grey also helps the blocks resemble the impassable areas in the DM's map.
The pieces are designed to be modular, movable and reusable, but players can choose to glue pieces down to make permanent room shapes, or even a whole dungeon level.
The wall pieces are "reversible". When turned upside down, the flagstone pattern means that they can represent walkways or an elevated level. Very useful for those bridges over chasms. A 3 inch (15x5ft) steps piece is provided to link ground and upper level.
The L-shaped pieces are especially handy as corners for delineating edges of very large rooms, even when no other blocks are used.

Printing and assembly
Compared to most dungeon scenery these blocks are very easy to print and assemble. Print onto card or paper on a home printer (A4 and Letter page size formats provided, print at 100% scale). The dungeon blocks print well in colour or greyscale (although the doors are colour). Cut-out the net designs with scissors. The tabs and fold lines are really just a guide - many modellers prefer much smaller tabs (modify as you see fit). Green lines are mountain folds, red are valley folds. Use paper glue or double-sided tape. Ideal for children - with supervision! The flagstone floor tile page is optional – you may already have preferred battlemat. Two to four copies of the sheet placed together will provide an adequate play area for the centre of a game table.
Printing onto white card is preferable but not essential. Hollow paper blocks might not support metal figures or heavy using the “upper level”.

Please Note: This is a print-and-play accessory only. It is not intended for digital editing or use with VTT software.

Compatible with most dungeon floor plan and battlemat products using the 1 inch scale.

Usage and Copyright
Inked Adventures and the artist Billiam Babble retain the rights to the original art work supplied herein. The customer is purchasing this product for “personal use” only – or to share with a small playing group – within reasonable limits. If you would like to use any element of this pack in a commercial or free-to-use product, please do not hesitate to contact Inked Adventures to discuss options. ©Art / PDF contents Inked Adventures/ Billiam Babble 2014 http://inkedadventures.com email:inkedadventures@yahoo.co.uk

Crypts, Tombs, and Catacombs: Cut-Up Sections PDF

Inked Adventures

56 pages of printable hand drawn modular dungeon sections, to cut-up and use with your favourite tabletop RPG, including scenery counters and easy-to-assemble 3D/2.5 models. 

Scale 1in/25mm = 5ft for use with 25/28/30mm figures.

This is a long awaited expansion to Modular Cut-Up Sections Basic Pack (see below), but can also be used as a stand-alone accessory.  Cut-Up sections are more versatile than square tiles because a DM can construct a map similar to that in the scenario that he is presenting.  Since the sections are hand drawn they will also compliment your own dry-erase battlemat art.

Print straight to paper or card, the illustrative style looks good in both colour and greyscale.

Please Note: This is a print-and-play accessory only. It is not intended for digital editing or use with VTT software.

Thumbnail of pages in the PDF

This printable PDF is available in A4 and US Letter formats.

Text from the Introduction:

Every element in this pack was originally hand drawn in ink on paper before colour and effects were added on a computer. The style is far from unique, as it imitates and emulates the professionally illustrated maps and game aids from a slightly earlier time in tabletop game publishing. Since Inked Adventures mainly use the 5ft=1inch scale this product will be compatible with other tiles players already own, but the hand drawn look means that they will not look out of place next to the DM's own map art on a dry-erase battlemat.
This set has grown in different directions. It was originally intended as a straightforward an expansion to the Inked Adventures Modular Dungeon Cut-Up Sections Basic Pack, but many elements in this set can be used independently from the rest of the Inked Adventures range.
There are two main styles of environs here: decrepit stone and skull-bone catacombs, with a few generic pieces in "basic grey".
The decrepit stone corridors and steps are designed to be used with standard grey walled rooms and chambers provided in the Basic Pack (and other Inked Adventures products). There is also curved (flower-like) Large Alcoves Chamber, plus a some small vaults -which can be converted into alcoves and antechambers by trimming away a wall and laying them on the edge of room sections. These all appear in a slightly decayed scheme (to match the decrepit corridors) and basic grey flagstones which will complement a more general dungeon setting.
For the skull-bone catacombs, a selection of rudimentary rooms have been provided with the corridors and steps.
For technical reasons of compatibility across devices and software, this PDF does not use switchable layers. Therefore scenery counters have been repeated with different backgrounds across different pages.
There are 3D elements which require assembly, hopefully, these will be self explanatory. The tabs provided on the cuboid coffins and tombs should be treated as a guide, feel free to modify or improve these. We recommend that the doorways and statues be weighted in some way - perhaps with coins or washers. Paper and card props are very vulnerable in play amidst the typhoon of sneezes and dice nudges. There is a page of skull filled "doors". These can represent collapsed corridors or secret passages. The can also be trimmed to represent mounds of bones. The statues can also be closely trimmed but this is left to the dungeon builder's discretion.
We strongly recommend that you browse this pack thoroughly before carefully selecting which pages you would like printed. As with many floor plan sets, whole ink cartridges can be rapidly emptied - you must choose wisely! As a customer of this product you will be notified of any improvements or amendments so that you can download the updated product, if you so wish.
Inked Adventures would like to attach a disclaimer to these hand drawn sets, that these designs will not always join exactly, or that there is a chance of slight inaccuracies in measurements, perhaps below the standards expected in computer generated dungeon designs. We hope that issues such as these will not have a dramatic effect on actual use in gameplay. If you zoom in on the images you perhaps will find variation in quality (possibly due to the prolonged development period where different scanners, PCs and software were used) generally we have found that the sections print very well in colour and greyscale on inkjet printers on white card or photo paper. These are not high DPI VTT files. This is rough and ready, download, print and play kind of accessory.
In the Paris Catacombs above the entrance, there is a pause-provoking epitaph. -"Arrête, c'est ici l'empire de la mort " - "Stop. Here is the Kingdom of the Dead"
Naturally a party of adventurers will see this as in invitation...

Usage and Copyright
Inked Adventures and the artist Billiam Babble retain the rights to the original art work supplied herein. The customer is purchasing this product for “personal use” only – or to share with a small playing group – within reasonable limits. If you would like to use any element of this pack in a commercial or free-to-use product, please do not hesitate to contact Inked Adventures to discuss options. ©Art / PDF contents Inked Adventures/ Billiam Babble 2014 http://inkedadventures.com email:inkedadventures@yahoo.co.uk

Inked Adventures: Forest Cut-Up Sheets PDF

Inked Adventures

With this versatile pack, a printer and card you can make tree counters, forest paths and forest clearings or a large battlemat for use with a tabletop RPG or wargame. The hand drawn art will compliment a referee's freehand dry-erase maps, but can also be used like tiles with loose scenery as an alternative to drawing on a battlemat. As well as the A4 and Letter size PDFs we have included the original graphics as JPGs should you wish to edit and make tiles using an art program of your own choosing.

Thumbnails of pages in the PDF file contains 6 pages:

1. Foliage sheet, dark green
2. Grass sheet, dark green
3. Foliage sheet, light green
4. Grass sheet, light green to yellow
5. Foliage sheet, b/w line art only.
6. Grass sheet, b/w line art only.

All repeatable designs suitable as base/background tiles or mats for small and large areas. Can also be cut up into scenery counters and overlays.

6 cropped image files (.ZIP), JPG format, 300 DPI resolution, 2100x2700 px (100px = 1 in. sq. appx.)

Disclaimer, usage and copyright
Hand drawn art disclaimer: The art in this pack was hand drawn with pen and paper and then scanned into a computer where colour was added. In its use, we cannot guarantee the exact accuracy in dimension or the "joining" precision that is standard in some computer generated art. Despite this, we hope that this product retains a "rough and ready" charm for the improvising referee for whom the product is intended.

Usage and Copyright
Inked Adventures and the artist Billiam Babble retain the rights to the original art work supplied herein. The customer is purchasing this product for “personal use” only – or to share with a small playing group – within reasonable limits. If you would like to use any element of this pack in a commercial or free-to-use product, please do not hesitate to contact Inked Adventures to discuss options. ©Art / Forest cut-up sheet PDF contents and files Inked Adventures/Billiam Babble 2014, http://inkedadventures.com

Inked Adventures: Square Dungeon Tiles—4x4 Rooms Bonus Pack PDF

Inked Adventures

These are extra rooms to go with the Inked Adventures: Square Dungeon Tiles set.

Three 20 by 20 ft. square empty rooms with a choice of corridor exits.

Black and white backgrounds are presented. Also included are special wall counters which can be used to cover unwanted exits in play.

The ZIP file contains 2 Square Tiles PDFs—one for A4 format, the other for US Letter format, plus a copy of the Guidelines PDF booklet from the main Square Dungeon Tiles Pack! If you like the hand-drawn look of these tiles please take a look at our other products, including the Inked Adventures: Square Dungeon Tiles.

Heroically Sized Furniture Counters PDF

Inked Adventures

Scale 1in/25mm = 5ft for use with 25/28/30mm figures.

Print straight to paper or card, the illustrative style looks good in both colour and greyscale.

These Heroically-Sized Furniture Counters are inspired by scenery from an older style of dungeon board game where dungeon furniture is standardised by area and not proportion.

In this PDF the cut-out counters roughly cover 3x1 squares and 3x2 squares, with the exception of the chest which is 2x2 squares. (1 square = 1 inch when printed at 100% scale)

3x1* Counters
Cupboard
Fireplace
Weapon Rack

(*slightly wider than 1 square when wall edge isn't trimmed away)

3x2 Counters
Table
Wizard's Desk
Tomb
Altar
Torture Rack

Plus a 2x2 Chest counter

One page printable PDF in A4 and US Letter formats.

Click fo low res graphic of PDF contents

Please Note: This is a print-and-play accessory only. It is not intended for digital editing or use with VTT software.

Compatible with most dungeon floor plan and battlemat products using the 1 inch scale. Ideal for use with Inked Adventures tiles and cut-up sections.

Usage and Copyright
Inked Adventures and the artist Billiam Babble retain the rights to the original art work supplied herein. The customer is purchasing this product for “personal use” only – or to share with a small playing group – within reasonable limits. If you would like to use any element of this pack in a commercial or free-to-use product, please do not hesitate to contact Inked Adventures to discuss options. ©Art / PDF contents Inked Adventures/ Billiam Babble 2014 http://inkedadventures.com email:inkedadventures@yahoo.co.uk

Heroically Sized Furniture Counters 2 PDF

Inked Adventures

Scale 1in/25mm = 5ft for use with 25/28/30mm figures.

Hand drawn printable 2D dungeon furniture counters with exaggerated perspective and size for use with 1 inch scale floor plans for use with 25/28mm+ figures.
These counters can be used with a DM's existing battlemat, tiles or floorplans.  
They are also an ideal companion to other Inked Adventures sections and tiles.

Sheet A: Wooden Crates, Wooden Barrels, Jars (inc. smashed jar), Chests, Pillars

Sheet B: Shelves, Dark Stone Thrones, Blacksmith's Forge, Cauldron, Piles of Gold, Cages, Fungi

Plus a 6x6 Inked Adventures room on Sheet C for your immediate enjoyment

Four page printable PDF in A4 and US Letter formats.

Print at 100% scale onto thin card, paper or photo-paper.  Then trim with scissors. Keep loose if you wish the counters to be reusable. Arrange during tabletop game. Alternatively they can glued into rooms and corridors before play.

Please Note: This is a print-and-play accessory only. It is not intended for digital editing or use with VTT software.

Usage and Copyright
Inked Adventures and the artist Billiam Babble retain the rights to the original art work supplied herein. The customer is purchasing this product for “personal use” only – or to share with a small playing group – within reasonable limits. If you would like to use any element of this pack in a commercial or free-to-use product, please do not hesitate to contact Inked Adventures to discuss options. ©Art / PDF contents Inked Adventures/ Billiam Babble 2014 http://inkedadventures.com email:inkedadventures@yahoo.co.uk

Inked Adventures: Hand-Drawn Geomorph Tiles PDF

Inked Adventures

Geomorphs for dungeon planning and random play have been making a come back in recent years. Being of a handy size (8cm sq) Geomorph Tiles are ideal for building “mega-dungeon” levels or mapping out smaller dungeons. With minimal effort these geomorph can be adapted from random play with most fantasy roleplaying systems. They can be used for preparation, inspiration or in play itself. Every tile has been painstakingly hand drawn in an illustrative style to provide you with a truly unique and beautiful product. As with other some other Inked Adventures products most of the walls have been drawn from a top-down 3D perspective – with a “classic” look of “old school” maps.

Contents of ZIP file:

• Geomorph Tiles PDF: 126 printable individual 8x8cm tiles (6 tiles per printed sheet). These are 63 unique designs plus mirrored versions, which include “access” entrance tiles and “terminus” end of row or edging tiles. Almost every tile has quadrilled grid incorperated into the art. Map areas of 50ft or 100ft square (your choice, depending how you interpret the squares). Monochrome colour scheme with special entrances marked in red.
• Game Master's Notes Sheets: 126 lined numbered sheets with an inset picture of every tile.
• Printable "Reverse side" page PDF: This is an optional page in the same shade as the edging of the tiles. Aesthetically pleasing when tiles are laid face down next to each other and are revealed during play.

PDFs are in A4 and US Letter size formats. Print to paper or card. Easy to cut up and assemble—ideal for children and clumsy grown-ups.

May your dungeons be beautiful!

Note: Small Scale Product!
Unlike some of other the Inked Adventures products these Geomorph Tiles are not scaled for use with 25-28mm figures. Each tile represents a large dungeon area and is only 8cm (3.2 in) across to minimize white-space waste. The 10x10 grid on each tile means that each square 8mm (0.3in) wide. If you require hand drawn 1in=5ft scale tiles or ready-use floor plan sections for use with miniature figures may we recommend Inked Adventures: Square Dungeon Tiles or our popular Inked Adventures: Modular Sections Basic Pack.

Inked Adventures: Large Dungeon Entrance PDF

Inked Adventures

Inked Adventures: Large Dungeon Entrance

Hand drawn in pen—coloured on a computer—this detailed entrance archway evokes games of yesteryear whilst bringing character to any modern fantasy RPG.

Towering over the adventurers, perhaps it's the ominous entrance to the dungeon, or perhaps every archway in the dungeon is built like this.

This 3D stand-up archway is ideal for use with any 2D dungeon layout, but it looks great with the Inked Adventures: Modular Dungeon Cut-Up Sections Basic Pack.

Suitable for use with 25mm/28mm/30mm figures.

(The gap is 8–10ft wide where 1 inch = 5 feet)

Prints well in colour or greyscale, to card, paper or photopaper.

One page only.

Inked Adventures: Modular Dungeon Cut-Up Sections Basic Pack PDF

Inked Adventures

Inked Adventures: Modular Dungeon Cut-Up Sections Basic Pack

This pack is designed for Dungeon Masters who like colourful hand-drawn card dungeon plans, similar in style to gaming accessories of yesteryear.

Innovative 3D wall effect on ALL corridor and room sections.

Inked Adventures: Modular Dungeon Cut-Up Sections are compatible with any fantasy role-playing game for use with figures (25/28mm/30mm scale).

Easy to cut up, ideal with card or paper, minimal assemblage.

36 pages of hand drawn colour graphics include:
• I. Doors—3D Stand-up or 2D flat—wood and stone.
• II. Corridors—5ft, 10ft, straight, diagonal, corners, junctions
• III. Steps, stairs, spiral stairs.
• IV. Rooms, a variety of dimensions and options.
• V. Objects, items, furniture, dungeon features, hazards.
• VI. Bonus entrance area (see sample pack) and Idol Chamber.

Endless combinations!

Printer-friendly colours. They look great in colour or black and white.

Create a massive dungeon area for your players to explore!

See our website for future packs and free downloads: inkedadventures.com

Inked Adventures: Modular Dungeon Cut-Up Sections—Sample Pack PDF

Inked Adventures

Along with the Inked Adventures: Modular Dungeon Cut-Up Sections Basic Pack we are providing this FREE sample pack. This pack is designed for Dungeon Masters who like colourful hand-drawn card dungeon plans, similar in style to gaming accessories of yesteryear.

Contains:
• 5 foot wide (1 inch / 25 mm) corridors with junction, stairs and corner pieces.
• 3 rooms
• door and connector pieces
• stand-up doors (single, wood)
• pit trap counters—a selection of essential furniture props and scenery counters.
• dungeon entrance area.

Innovative 3D wall effect on corridor and room sections.

Inked Adventures: Modular Dungeon Cut-Up Sections are compatible with any fantasy role-playing game for use with figures (25/28mm scale).

Easy to cut up, ideal with card or paper, minimal assemblage.

Endless combinations!

Printer-friendly colours. They look great in colour or black-and-white.

Create a massive dungeon area for your players to explore!

Please Note: Some of the art in this sample pack was prototype art. Improvements have been made in the Modular Dungeon Cut-Up Sections Basic Pack—such as back-to-back door alignment, better edging to sections and more accurate alignment between sections and so on. Also, the parchment background in this Sample Pack was designed as part of an ornate showcase "brochure"—which can, on some printers, be draining on ink—but this is not representative of the backgrounds in the Modular Dungeon Cut-Up Sections Basic Pack, which are mainly white. In the future, Inked Adventures may be revising the free Sample Pack to make it more printer-friendly.

Inked Adventures: Evil Summonings! PDF

Inked Adventures

Inked Adventures: Evil Summonings!

Two pages of colour Modular Dungeon Cut-Up Sections with a map.

This mini-map floor plan can be incorporated in to a larger dungeon map or be used as a "lair" for a one-off adventure or encounter.

These sections can be used with the Inked Adventures: Modular Dungeon Cut-Up Sections Basic Pack (or even just the Free Sample Pack!)

Although intended for use in a medieval fantasy campaign, these sections could be used in a contemporary horror setting as well.

One inch grid. Usable with 25/28/30mm miniatures.

Hand Drawn. Ideal for fans of old school, vintage pen 'n' paper RPGs.

Inked Adventures: Square Dungeon Tiles PDF

Inked Adventures

Welcome back to the illustrated dungeon!

31 square dungeon themed tiles with hand-drawn elements with doors and scenery counters. Suitable for use with 25/28/30mm figures (1in = 5ft).

The ZIP file includes a choice of PDFs in A4 and US Letter formats—with black or white backgrounds (The PDFs do not use layers—for viewing compatibility in most browsers and software).

Square Dungeon Tiles (31 pages, 7x7 square tiles)

1. Fountain Room
2. Magical Chamber
3. Statue Reception Room
4. Collapsed Floor Room
5. Idol Chamber
6. Alcoved Tombs
7. Cells Jail Gaol
8. Corner Chamber
9. Crypt Room
10. Corridor
11. Corridor Corner
12. Corridor T-Junction
13. Corridor X-Junction
14. Corridor Dead End
15. Stairs
16. Spiral Steps Down
17. Spiral Steps Up
18. Room 30ft sq 4 Exits
19. Room 30ft sq 3 Exits
20. Room 30ft sq 2 Exits Opposite
21. Room 30ft sq 2 Exits Adjacent (inc. Well)
22. Room 30x20ft 4 Exits
23. Room 30x20ft 3 Exits
24. Room 30x20ft 2 Exits Adjacent A
25. Room 30x20ft 2 Exits Adjacent B
26. Room 30x20ft 2 Exits Opposite
27. Long Room End
28. Long Room Middle
29. Massive Room Corner
30. Massive Room Edge
31. Massive Room Centre

Doors and Scenery

• Stand-up double and single wooden doors (2.5D)
• Scenery counters, including pillars, fallen rocks, gold, bodies, chests, tables and more
• Wall blocking pieces (for covering unwanted exits on the tiles)

Inked Adventures: Square Dungeon Tiles are ideal for random play and are compatible with other Inked Adventures products. This product was created in response to numerous requests by gamers who wanted the Inked Adventures style art in a square geomorphic tile format. We hope that this pack lives up to those expectations! Please note: each tile and scenery pieces have been assembled on a computer using many hand-drawn elements. However, due to the nature of this process, some details are repeated, and there may be some inaccuracies in joins and dimensions—which can occur when scanned ink lines are used in printed products. There is a rugged charm in hand-drawn grids which can be hard to replicate on a PC. Where possible we have erred towards aesthetic over exactitude.

Inked Adventures: Small Dungeon Door PDF

Inked Adventures

A Small Dungeon Door
(stand-up, barred window)

Suitable for use with 25mm/28mm/30mm miniatures.

Cheap at half the price... no, wait—it's FREE! :)

These free-standing doors (forgive the pun)—with hand drawn line art—are part of the Inked Adventures' Modular Dungeon Cut-Up Sections range.

This design is not included the Basic Pack or Free Sample Pack, but it will work well with either. It can be employed as a standard wooden door or a reinforced gaol door with barred window.

These stand-up doors will also enhance any 2D floor plan or dungeon tile system.

Easy to assemble. Perfect for younger players.

1 Page.

Rooms for Warlocks PDF

Inked Adventures

Scale 1in/25mm = 5ft standard scale for use with 25/28/30mm figures.

Three large printable dungeon rooms with a magical theme, using hand drawn elements.  Top-down 3D-effect walls.  Compatible with other Inked Adventures sections and tiles.  Doorway connector counters included.  Modular, can be rearranged into different layouts.

Ideal for a special part of a dungeon, a mystical cult lair or magicians' college.

Floor Dimensions

Long Gallery 20ft x 80ft, 4x16 squares

Chamber of the Sun-Eye 40ft x 40ft,  8x8 squares

Hall of the Hex Flame  40ft x 40ft, 8x8 squares
(inverted design of the Sun-Eye floor)

Format

2 PDF files for A4 and Letter size printers.

Print straight to paper or card, the illustrative style looks good in both colour and greyscale.

Please Note: This is a print-and-play accessory only. It is not intended for digital editing or use with VTT software.

Thumbnail of pages in the PDF

Usage and Copyright

Inked Adventures and the artist Billiam Babble retain the rights to the original art work supplied herein. The customer is purchasing this product for “personal use” only – or to share with a small playing group – within reasonable limits. If you would like to use any element of this pack in a commercial or free-to-use product, please do not hesitate to contact Inked Adventures to discuss options. ©Art / PDF contents Inked Adventures/ Billiam Babble 2014 http://inkedadventures.com email:inkedadventures@yahoo.co.uk

Wooden Floor Cut-Up Sheets PDF

Inked Adventures

Scale: 1inch grid suitable for 25/27/30mm minis or figures. Printable PDFs. Letter and A4 page format. Colour and black/white line art provided. (4x 1 page PDFs)

These wooden floor cut-up sections will be included with a forthcoming set of Inked Adventures Blocks as a base tile, however they work well as a versatile product in their own right.

The one page (6×10 squares) can be printed multiple times and assembled together to create a large battlement tile, or it can be cut into individual sections to represent corridors, small rooms in building floor plans. They can used in abstract ways to represent square huts, tree houses, trapdoors, wooden bridges in the wilderness and so on. This is very much along the lines of simple gaming accessories which were used in the 70s and early 80s.

The black and white art sheet is ideal for referee’s who wish to save on printer ink, or alternatively, can be coloured in with felt pens (a creative pre-play option for very young players). The hand drawn style can compliment a referee’s freehand dry-erase map, with wooden floor sections being used within the scenery drawn on the battlement.