| Full Name |
How to make the most of your Shark NV360? |
About sharknv360
How to make the most of your Shark NV360?
Intro
The Shark navigator lift-away deluxe NV360 is undoubtedly a good product from Shark, especially if you are interested in the budget-friendly category. It comes with many useful features that you would want from a standard upright model, and a few extra from Shark’s proprietary designs. As a result, you’ll find it functional and effective in most cases, with some exceptions.
That being said, it’s still a more basic vacuum product from Shark, so you can’t expect all the features to be completely perfect. But as the consumers, there are a few things that we can do to make our Shark NV360 better.
And for those of you who come from our Shark navigator NV360, you can learn more about the product and how to make the most of it as a consumer, with our helpful guides. Here, we’ll tackle the certain problems that you’ll run into while using the machine and how to deal with them. At the same time, we’ll also point out many useful features from the machine that you might not have noticed yet. So make sure to check them on, if you want to fully utilize your vacuum unit.
- Work on different surfaces
One of the features that makes the machine capable is the adjustable brush options, which is positioned right above the canister unit. Here, the Shark navigator lift away deluxe will allow users to work with their brush roll on or off, which is extremely helpful if you are cleaning on multiple surfaces. As a result, you can now have the brush roll on when working on carpets, so that the bristles can work their way into the high-pile rugs and loosen up all the dirt, making it a lot easier to clean.
At the same time, when working on hard surfaces, such as tile or hardwood floors, you would love to have the brush roll being turned off. This will prevent the spinning bristle from sending small debris flying all over the place, making it more difficult to work on them. In addition, with the brush stops spinning completely, you can comfortably work the vacuum on your dedicated floors without scratching the coated surfaces. This should be perfect for your laminated wooden floor.
- Make uses of the suction release
Also, when working on certain areas of your house, especially on carpets, the powerful suction and the low-profile cleaner head can cause the machine to stick on the floor, making it relatively difficult to move around.
If that’s the case, then you’ll find the suction release option on your Shark navigator lift-away deluxe NV360 upright vacuum being extremely helpful, as it allows you to easily reduce the suction power. Just simply turn the cover to unleash the air holes, which will turn down the power quite a bit.
Also, when working on dedicated surfaces, you will also find the included suction release quite useful. By releasing the air holes, you can reduce the suction when working on upholsteries, curtains, and other items that don’t require too much power from your vacuum. As a result, you can still clean up the items without scratching or damaging them.
- Working with certain wastes
While the navigator lift-away dlx vacuum cleaner can perform relatively well on most types of dirt and debris, there are still a few things that you need to keep in mind, to make sure that you can fully utilize the machine.
Like many low-profile upright vacuums, the NV360 will not function perfectly on hard floors when dealing with extra-large debris. This is because the small space on the front isn’t enough for these debris to get through. So you’ll often push them forward instead of sucking in. To counter this, you might want to slightly turn the handle backward to create space on the front, making it easier for large debris to get into. And if it’s possible, you should always use the vacuum hose option to clean.
In addition, with just a basic setup and a standard brush roll, the machine doesn’t come with advanced tangle-free options. Hence, you’ll often find hairs and lint getting stuck on your device’ brush roll. So you should use the hose vacuum option to save your time cleaning the tangles, unless you are planning to clean the vacuum later on.
- Effectively clean the unit
As mentioned in our Shark NV360 review, the machine comes with its fully-featured filter system, which will prevent dust from damaging the inner vacuum components and getting dispersed into the room. And to ensure its function, you can and should clean up your filters frequently.
Just simply unclip the dust container by unlocking the two clips on the sides. Take out the foam and fiber filters to clean them later on. Proceed on taking out the HEPA filter shield at the front of the canister, which also comes with a clip-on lock. Inside, you can access and remove the HEPA filter.
Now, all three included filters can be easily cleaned with water. You just need to let them run under tap water for a few minutes until they are completely cleaned. Then let them air dry for about 24 hours before you put them back on.
This will guarantee that your devices’ filters can function properly, and will also prevent suction losses on your machine after an extended period.
Keep the tool clip on
To make it easier and more convenient for homeowners, the bagless vacuum does come with its tool clip, which will arrive inside the package. Make sure that you have it installed on your device’s handle. There, you can keep the crevice tool and dusting brush without causing any discomfort while moving. And whenever you need to use them, just simply take them out and attach to your house, which is absolutely convenient.
- Deal with the compression fit attachments
Another thing with the upright vacuum is that it comes with compression fit attachments, which are little difficult to handle compared to the more advanced locking mechanism.
Basically, you just need to push the attachment as hard as you can into the hose to guarantee a secured fit. This will prevent the tools from falling out while you are working with them. But, it also causes some problems when you need to take them out, due to the tight fit.
In this case, you shouldn’t just push or pull out the items. Instead, you should try to turn them in either direction to loosen the connection, then try to pull out the attachments. You’ll find it a lot easier and more comfortable to work with.
See Also: https://thekinglive.com/shark-navigator-lift-away-deluxe-nv360.html
Conclusion
Our Shark navigator lift away deluxe reviews have definitely pointed out the advanced features on this budget-friendly model. And while it does come with certain cons, we hope our informative guides above can help to improve your daily uses of the machine, making it more capable and effective in most cases.
